Digital Infrared Thermometer, Forehead Thermometer, Non-Contact Thermometer for Adults and Kids | White

Quick start guide

 1. Measure forehead temperature: Press the "Measure" button to turn it on. Hold the thermometer 1-3 cm away from your forehead. Press and release the "measure" button to beep and read the value.

2. Measure object/room temperature: Turn off the thermometer and press the "Mem" button for 3 seconds. Put the thermometer about 1-3 cm away from the object. Press and release the Measure button, you will hear a beep and read the value.

3. Check 35 sets of previous readings. Turn on the thermometer, short press the "Mem" button to enter memory mode. Pressing the "Mem" button again will display the 35 memory sets one by one. If there is no value, "---M" is shown.

4. ℉/℃ Switch: When the thermometer is on, press and hold the "Mute - Unmute" button for 5 seconds to toggle.

5. Mute/Unmute Switch: When the thermometer is on, press the "Mute-Unmute" button for 1 second to toggle.

Note:

 1> There are two situations in which the thermometer screen may appear red.

1. The screen will display “Lo”. There are two possible causes.

(1) The distance between objects is too far or too close.

(2) the temperature value is less than 32°C (89.6°F);

2. A specific value will be displayed on the screen. This means there is some heat.

2> When measuring temperature on different parts of the body, it is normal to have slight variations in temperature readings.