Evaporative Humidifier, Cool No Mist Evaporative Humidifiers for Bedroom Home Large Room Baby Room, 4L Top Fill Small Air Humidifier, Easy to Clean, Whisper Quiet, Smart APP Control, Auto Shut-off | White

Cool No Mist Humidifiers for Bedroom, Home & Large Rooms

Are you annoyed by the white residues left over after long-term use of the humidifier?

Here comes your solution: cool no mist humidifier won't produce water vapor during evaporation. That means you don't have to worry about water stains or water impurities even after long-term use.

Designed with day-to-day use and security in mind, baby humidifier has been specially constructed with a separate water tank and electrical components. If the water tank is separated from the unit at any time, a sensor will automatically deactivate the baby humidifier for bedroom and shut off the cross-flow fan, so avoiding potential damages or injuries.

With a 4L water tank, evaporative humidifier for bedroom can work as long as 24 hours. Once the water reaches its minimum level, the unit will continue to operate for eight hours, evaporating excess water.

smartmi Cool no mist humidifier can be controlled with Mi Home App, allowing you to keep tabs on its sensors, temperature status, and water levels.

Smartmi Cleaning Advice

Cleaner recommendation

For the white sediment in the humidifier, you can add an appropriate amount of food-grade citric acid detergent for cleaning.

After long-term use, the odor caused by the growth of molds can be cleaned by adding an appropriate amount of hypochlorous acid solution.

Thorough Cleaning Steps

1, Add an appropriate amount of water (5L) to the pool, then add 1 bag of citric acid concentrate cleaner (24g/bag), then remove the evaporation blades from the evaporation tray one by one, and put them into the solution for 30 minutes of soaking. Then use a brush to brush down the stubborn dirt on the surface of the evaporation blades.

2, Reassemble the evaporation blade and put it back into the water tank.

3, Please add 100 ml of hypochlorous acid solution with a concentration of 100 mg/l, then dilute the solution by adding room temperature water to the full water level of the tank and soak it for 4 hours. Finally， you could rinse the evaporation tray and water tank with water.