Fingertip Pulse Oximeter; Blood Oxygen Saturation Monitor with OLED Display; Portable Digital (SpO2) Meter

The SpO2 measuring device is a common measuring device that helps to early detect hypoxia in patients with hypoxemia, such as bacterial pneumonia, bronchial asthma, obstructive sleep apnea syndrome. sleeping (often snoring)... and COVID-19 patients.

+ SpO2 of normal people will fluctuate at 95 - 100%.

+ SpO2 from 93 to 99%: Good blood oxygen index.

+ SpO2 less than 93%: need to breathe additional oxygen and have signs of hypoxia in the blood.

+ SpO2 below 80%: Severe respiratory failure and need medical assistance.

How to use :

Step 1: Check if the device has a battery or not, if the battery runs out, you need to replace the battery with a new one

Step 2: Open the clamp, put your finger in the clamp slot so that the tip of the finger touches the end of the machine.

Note: Do not apply nail polish, artificial nails or cosmetics on the finger being measured. Make sure the nail is not too long, so that the tip of the finger can cover the sensor in the clip slot.

Step 3: Press the power button to start the machine. Do not move your hand during measurement. The measurement result will be displayed on the screen after a few seconds.

Step 4: At the end of the measurement, pull out your finger Designed for sports and aviation enthusiasts, can be used as a heart rate monitor, does not take up much space and can be easily carried .

The mechanism of action of the SpO2 meter can be measured with pulse oximetry, which is an indirect, non-invasive method (i.e. without the introduction of the instrument into the body).

It works by emitting and then absorbing a wave of light that passes through the blood vessels (or capillaries) at the fingertips.

The variation of the light wave transmitted through the finger gives the value of the SpO2 measurement because the degree of oxygen saturation causes a change in the color of the blood.

You can easily measure SpO2, PR with Blood Oxygen Meter.

Compact size and elegant design

SpO2 is an estimate of arterial oxygen saturation

PR measures heart rate

Volumetric waveform meter; clock frequency

Works effectively with low perfusion

Scope of application: For babies, children and adults.