Metal Detector Pinpointer - Professional Handheld Pin Pointer Wand, High Sensitivity Portable Lightweight Search Treasure Pinpointing Finder Probe for Kids, Adults
Highlights
🌈【High Sensitivity Metal Detector】 The metal detector allows you to quickly scan a large area, then uses precise positioning tips to narrow and pinpoint your target before digging . The rod probe design allows you to insert the hand held metal detector into the hole for detection.
🌈【Easy Operation】 Single button, LED light will be on when metal object is detected. At the same time, there will be 'Bi-Bi' sound and vibration as an alarm. The alarm intensity will increase when the detector is close to the metal target. This unique feature helps the user to determine the exact location of the target.
🌈【Lightweight】One third of the weight of a traditional metal detector. Powered by two 9V batteries, plastic elastic coil belt, belt case and bag, easy to carry or hang up to prevent dropping or misplacing. One button to open for independent activity.
🌈【Partially Waterproof】The needle tip of the dustproof metal detector is partially waterproof. You can submerge this part in water and test the metal in the water. However, it cannot be used in water and the switch and whistle are not waterproof.
🌈【Wide Range of Applications】This metal detector needle can do all kinds of work, such as finding coins, gold, silver, artefacts, jewelry, making it easy for you to find stock lost treasure or metal, whether indoors, outdoors, on walls, sand, grass, or soil, even in the extreme temperature range of -35ºF (-37ºC) to 158ºF.
You May Also Like
Featured:
Sound & Vibration Modes: Featured with sound mode, vibration mode, ideal for detection in outdoor, open spaces and noisy environments. And the LED light allows you to detect in the dim night.
360° Side Scan Recovery: The Metal Detector allows you to hold the metal detector to scan large areas quickly. Hold it on its side, close to the ground, and sweep back and forth quickly. Once the general position of the target is known, use the probe to pinpoint the target.
Convenient holster & lanyard: Comes with a portable hanging rope for easy carrying and not easy to fall off. The holster conveniently secures the detector to any standard belt.
Useful Blades: Features a 3.62-inch scraper blade on the detector to screen for dirt while searching for a target, also ideal to use for raking, scraping or flattening soil while side sweeping.
Wide Application: This metal detector is an indispensable tool to speed up target recovery, accurately find small objects, prevent digging large holes, identify many nearby objects, searching in tight interior areas such as walls and ceilings, locating nails and metal wall studs indoors, etc..
360° precise point detection and simple operation
360° scanning technology can help locate metal accurately. The rod design allows you to insert the handheld metal detector into the hole for detection.
IP66 waterproof can make the pointer work in wet environment. It is partially waterproof. Please do not let water cover on the LED light.
LED lights help a lot in the dark. Very convenient. No need to open an electric torch. Release the other hand to dig.
One-button operation, simply pressing a button after inserting a 9V battery, allows users to quickly turn off detection without having to go through multiple sensitivity settings.
Dual Alarm Mode Vibration and Whistle.
Usage Method:
1. Press the power switch means turn on,press it again means turn off.(The LED lighting turn on /off follow this operation.)
2. After the power is turned on,the indicator light is on. Please make sure the detector is no metal within .5 meters,after 2-3 seconds of power on,the detector metal can be searched.
3. If no metal is found but an alarm sounds,this is caused by external interference and can be used normally by rebooting
Battery Replace:
Install a 9V battery or a 9V rechargeable lithium battery for using(Battery Is NOT Included). When the battery is becoming low,the detector will sound an alternating dual-tone alarm. You need to replace the battery,if it is a lithium battery,you have to charge it.
Note:
1. The battery compartment is keyed to only accept battery contain the proper position. If a 9V battery is improperly installed,no circuitry damage will occur. However,it is important to observe the polarity of the battery and the detector battery compartment to ensure operation. Never force the cover to close.
2. Remove the battery when the detector is to be stored for more than 30 days.
3. As the detector is moved in closer proximity to a metallic target,the rate of the pulsing audio and vibrations will increase proportionally. As the detector is moved away from the metallic object,the rate of the pulsing audio and vibrations will decrease.
Specifications:
Product Type: Handheld Metal Detector Pinpointer
Material: ABS
Color: Orange
Power By: 9V Battery (Not Included)
Scraping Blade Length: 9.2cm/3.62in
Working Temperature: -20°C~60°C/-4°F~140°F
Detection Way: Vibration, Light Alarm
Operating frequency: 12kHz
Tuning: Automatic
Retractable Hanging Wire Length: 20-108cm/7.87-42.52in
Item Size: 22.8x4.9x4cm/8.98x1.93x1.57in
Item Weight: 147g/0.32lbs
Package Lists:
1 x Hand Held Metal Detector
1 x Holster
1 x Retractable Hanging Wire
1 x User Manual
-
{{ getFirstLetter(comment.full_name) }}Verified purchase{{ comment.title }} by {{ comment.full_name }} on {{ formatTime(comment.created_at) }}{{ getFirstLetter(subComment.full_name) }}{{ subComment.full_name }} on {{ formatTime(subComment.created_at) }}Load More